Table of Contents
Advertisement
If you have been logged out by other users, you can complete additional tasks in the online
parameterization by using "Login".
8.4.4. Product and device parameterizations
Two different types of stored parameterizations are provided in the enSuite database:
A Product parameterization belongs to an enCore product class (e.g. enCore FC1, GasLab Q2,
proChain GC) and may be used as a template when creating a parameterization for a specific device.
By using File – New , you can then create a new product parameterization.
A Device parameterization belongs to a specific device with a fixed serial number. A device
parameterization can only be transferred to the device with the matching serial number.
A device parameterization may be obtained, for example, when reading an existing parameterization
from a device ( section
completely new device parameterization (either based on a product parameterization or without a
template) for a specific device in the enSuite database after selecting the action New
parameterization.
You can save a device parameterization as a product parameterization so that it is available as a
template for parameterizations for other devices.
Information for general use
Rev. M / 73023639
CONFIGURATION AND ANALYSIS SOFTWARE ENSUITE
Figure 8.31: Online parameterization login and logout
8.2.6 Read-out
parameterization). Alternatively, you can create a
181
GasLab Q2
Advertisement
Table of Contents
