Table of Contents
Advertisement
Displays and functions
7.3.
Although the Q2 main display contains all the relevant information, some applications require you
to change the display. You can get to any display using the navigation methods explained in the
previous section. In addition, device dialogs and confirmation prompts guide you through the
displays. Progress displays provide information about the success and progress of actions.
Changing display is generally done using a special display known as "Home". This is the main node
for the device. This display is explained first of all as it provides a better understanding and a good
overview. Starting from the "Home" display, various other displays and functions are then presented
as well as the details described.
7.3.1.
Home (display overview/device language/start-up error)
After start-up or power-up, the "Home" display can be accessed using
This is a special display; it shows the software structure of the GasLab Q2.
Individual software parts and selected other functions which should be easy to access (for example,
changing the language) are displayed here in the form of small symbols. These symbols are marked
with the name of the relevant function and may contain additional branching. The following figure
shows the main node, the "Home" display.
The menu structure is like a tree, in other
words, a subordinate menu option of a module
may, in turn, include subordinate menu
options and branch off to the side.
Only the contents of the "Home" display on
delivery are described below.
If you have the required rights, you can change
and supplement this structure.
( see chapter
8 Configuration and analysis
software
enSuite)
Information for general use
Rev. M / 73023639
GASLAB Q2 DISPLAYS (OPERATE THE DEVICE)
The current time is shown
in the top right-hand corner of most device displays.
99
Figure 7.14: "Home" display nodes
.
GasLab Q2
Advertisement
Table of Contents
