Table of Contents
Advertisement
3 Printer Setup
Notes
With a small intervention it is possible to reverse your winding direction. Mount the twist cable between the
control box and the front motorized unit cable.
Notes
You can use the roll-off foot switch during loading of roll media.
3.4.3 Setting Media Type
The procedure for setting media type is explained below.
Turn the printer on and load the media.
Step 1 :
Once the media has been set, the media initial menu will be displayed.
Press one of the following keys on the operation panel, and select the current media type.
Step 2 :
When alternating roll/sheet media selection: [F2]
When changing from media loading: [F3]
When changing media type: [F4]
Setup items
Key
Media type
F2
Lever Down/Up
F3
Media Type
F4
28
Parameters
Description
Roll media
Alternates the roll media type.
Sheet media
• Roll media: Set when loading roll media.
• Sheet media: Set when loading sheet media.
Lever up
Switches between up and down motion of the pressurizing
Lever down
lever.
Use this when starting over from the media setup.
User 1
Set media type for printing.
User 2
For setup values of printing operation, eight settings of "user
User 3
1-8" can be set.
User 4
Refer to 'Menu Overview'
User 5
User 6
User 7
User 8
8265/8290/8365/8390 User Guide
Advertisement
Table of Contents
