Xerox 8290 User Manual page 118

6.2.3.2 Replacing the sponge in the spitting box.
Notes
•
Use gloves and tweezers to change the absorbent in the flushing box.
Power ON the printer.
Step 1 :
Go to the H.Unlock Menu and press the F2 key to unlock the carriage.
Step 2 :
Open the Front Cover.
Step 3 :
Slide the carriage to the left to access the flushing sponge.
Step 4 :
Remove the old flushing sponge with tweezers. (See image below)
Step 5 :
Install the new flushing sponge in the flushing box.
Step 6 :
Notes
•
Make sure that the 2 holes are on the right side of the flushing box and that the pins of the black box
are in the holes of the absorbent.
Close the Front Cover.
Step 7 :
Press the [ENTER] key to exit the H.Unlock Menu. The carriage will cap in and be locked.
Step 8 :
110
1 = Sponge
2 = Tweezers
3 = Gloves
1 = Two holes
2 = Pin of black box
6 Maintenance
8265/8290/8365/8390 User Guide