Xerox 8290 User Manual page 85

4.3.5.3 HeadWash Menu
To perform a head wash to remove all ink of the ink supplying system.
Setup items Parameters
HeadWash No
Yes
-
Notes
Only after two head wash cycles it is possible to change ink types. Use the 'Ink Load' to load ink
The process consists of several cleaning loadings, several air loadings and one ink loading. On the
display of the operation panel a time indication is mentioned on the fourth line.
Message
4.3.5.4 InkLoad Menu
Start and stop an ink load.
Setup items Parameters
InkLoad Pump 1
Pump 2
ALL
-
8265/8290/8365/8390 User Guide
1. Please remove cart.
2. Ink Discharge
3. Please insert Cleaning cart
4. During washing wait for a while
5. Remove cassettes
6. During washing wait for a while
7. The end
8. Ink Load
Description
Do not wash the ink supplying system.
To wash the ink supplying system.
• [CANCEL] key: shift to the previous hierarchy
menu.
Time
29
13
Description
Load ink into head 1 and 2
Load ink into head 3 and 4
Load ink for complete system
• [CANCEL] key: shift to the previous hierarchy
menu.
4 Printer Operation
7
7
77