Xerox 8290 User Manual page 108

5 Troubleshooting
(2) Error messages regarding warnings of the remaining ink
The following error message is displayed on the forth line on the operation panel.
No. Display
1 Near End [*]
Notes
The [*] shows the colour of the ink causing the error according to the following codes:
•
1-8 : ink cassette slot number (Refer to 'Installing ink cassettes')
•
All : All ink cassettes
(3) Other error messages
The following error message is displayed on the forth line of the operation panel
No. Display
1 Ink Status
Cassette [*]
2 Ink Status
No Filled [*]
3 No original ink
4 4 Memory Status
NoMemory
DIMM 64 MB
Notes
The [*] shows the colour of the ink causing the error according to the following codes:
•
1-8 : ink cassette slot number (Refer to 'Installing ink cassettes')
•
All : All ink cassettes
100
Descriptions
The ink is running short in the ink
cassette.
(The printer continues to perform.)
Descriptions
Ink cassette(s) is (are) empty.
(The printer stops.)
Initial filling has not been
performed.
You did not load XEROX's
recommended ink cassette.
(The printer stops.)
SmartChip is not well
positioned on the cassette
Short of memory while
converting or printing data.
Solutions
Prepare a new ink
cassette.
Solutions
Replace the ink cassette(s)
Perform initial filling of the ink.
Load XEROX's
recommended ink cassette.
Reposition the smart-chip
(17.75 ± 0.5 mm from the
right side and 43 ± 0.5 mm
from the bottom)
Consider increasing the
memory capacity.
8265/8290/8365/8390 User Guide
References
Refer to 'Replacing
ink cassettes'
References
Refer to 'Replacing
ink cassettes'
Refer to 'Installing
ink cassettes'
Refer to 'Replacing
ink cassettes'
-
-