Table of Contents
Advertisement
4.3.4 Setup Menu 4/7
4.3.4.1
Utility menu
Perform various settings for application functions of products.
Setup items
Parameters
Utility (1/3)
ErrorDisplay
MediaDet.
OnCleaning
MediaWidth
Utility (2/3)
Prn+Wipe
SmartTop
AutoClean
CapCycle
Utility (3/3)
SlantCh.
RemPanel
Utility (1/3 – 3/3)
-
8265/8290/8365/8390 User Guide
*
Utility*
ErrorDisp.
MediaDet.
OnCleaning MediaWidth
)
(1/3
*Utility*
SlantCh.
RemPanel
(3/3)
Description
To set display method to the operation panel when minor error
occurred.
When media has been initialized, to perform detection of width
and front edge of the media.
Cleaning should be performed automatically when the power is
turned on.
If media detection is not performed for initial media, to set the
width of the media in the tray.
To wipe while printing, to take care of possible condensation
on the print head nozzle plate.
The ideal temperature of the media is near to the preheater.
This area of paper is fed before a print starts to obtain perfect
quality.
Performs cleaning cycle while printer is idle at the set
temperature.
To perform auto tubing flush when printer is idle.
Whether to perform a SlantCheck or not.
Enables Remote Panel software access.
• [CANCEL] key: To shift to the previous hierarchy menu.
4 Printer Operation
67
Advertisement
Table of Contents
