Table of Contents
Advertisement
No.
Display
1
Ink Refill **min
2
During cleaning **min
3
Media Initial ********
4
During discharge
Wait for a while
5
During washing
Wait for a while
5.3.2 Error Message Display and Solutions
The following are the message type error display and solutions. The following message type errors are
displayed when an error occurs while operating the printer. When one of the following message type
error displays appears, the printer may stop operation. If the printer stops operation, solve the problem to
delete the error message and restart the printer.
(1) Error messages regarding media feeding
The following error message is displayed on the first line of the operation panel.
No.
Display
1
Undefined
media
2
Media Slant
3
End Of Roll
4
Cover Open
5
Please Set
Media
6
Media JAM
Error
8265/8290/8365/8390 User Guide
Solutions
The printer performs ink charging. Wait for a
while.
The printer performs head cleaning. Wait for a
while.
The printer performs initial setting of media.
Wait for a while. Indicates the media type setting
made.
The printer performs head cleaning and ink
discharging. Wait for a while.
The printer performs a head cleaning.
Wait for a while.
Descriptions
The printer failed to detect the
media.
(The printer stops.)
The media was fed at an angle into
the printer.
(The printer stops.)
Roll media runs out.
(The printer stops.)
The front cover is open. (The printer
stops.)
The pressure roller has been
raised.
There is no media.
The media jammed.
(The printer stops.)
References
Refer to 'Installing
ink cassettes'
Refer to 'Head
cleaning'
Refer to 'Setting
media type'
Refer to 'Changing
Ink Types'
Refer to 'Changing
Ink Types'
Solutions
References
Reload the media.
Refer to 'Loading
media'
Reload the media.
Refer to 'Loading
media'
Load new roll
Refer to 'Replacing
media.
media'
Close the front
-
cover.
Set the media and
-
lower the pressure
roller.
Remove the
Refer to 'When
jammed media and
media jams occur'
reset a media.
5 Troubleshooting
99
Advertisement
Table of Contents
