Xerox 8290 User Manual page 79

4.3.4.9 CapCycle Menu
Perform a TubingFlush every 1 to 24 hours.
Notes
A TubingFlush is automatically performed after 10 minutes of idle and before shut down of the printer.
Setup items Parameters
CapCycle OFF
1 – 6 - 24 hours
-
4.3.4.10 SlantCh. Menu
To enable or disable whether the printer performs a slant check after every print of at least 1 meter.
Setup items Parameters
SlantCh. Off
On
-
4.3.4.11 RemPanel Menu
Enables or disables using Remote Panel software.
Setup items Parameters
RemPanel. Off
On
-
8265/8290/8365/8390 User Guide
Description
No tubing flush will be performed
Every 1 – 24 hours (adjustable) a TubingFlush is performed.
• [CANCEL] key: To shift to the previous hierarchy menu.
Description
No SlantCheck
Perform SlantCheck
• [CANCEL] key: To shift to the previous hierarchy menu.
*RemPanel*
Off On
-On- (1/1)
Description
Remote panel usage is disabled.
Remote panel usage is enabled.
• [CANCEL] key: To shift to the previous hierarchy menu.
4 Printer Operation
71