Winder/Un-Winder Operation Labels - Xerox 8290 User Manual

2.2.8 Winder/Un-winder Operation Labels

The operation labels mentioned below are attached to areas to which attention should be paid.
Notes
•
Make sure that all labels can be recognized. If text or illustrations are invisible, clean the label.
•
When cleaning labels, use a cloth with water or neutral detergent. Do not use a solvent or gasoline.
•
If an operation label has been damaged, lost or cannot be recognized, replace the label.
Foot switch label
Front tensioning label
8265/8290/8365/8390 User Guide
PCB box label
2 Printer Overview
Roll unit handle label
Rear tensioning label
17