Control Panel During Printing; Heaters Are Not Ready During Printing; Heaters Are Ready During Printing - Xerox 8290 User Manual

4 Printer Operation

4.5 CONTROL PANEL DURING PRINTING

When sending a file to your printer, following messages can be displayed.

4.5.1 Heaters are not Ready during Printing

When the heaters are not reached their target temperature, the following screen will be displayed.
Still, it is possible to start the print. However, the heater will continue to warm up in order to reach the
requested temperature.
Press the F3 key to ENTER the HeaterStatus menu.
Step 1 :
Wait Heating
Dist.Adj. Cleaning
A: HB: HC: HD:H
Heater Warming up
Go to submenu 2/2 and press the F2 key to start the print.
Step 2 :

4.5.2 Heaters are Ready during Printing

When heaters are ready, the printer will start printing.
While printing, some actions can be taken.
1) On the fly step adjustments.
In case of overlapped printing images or white lines on printing image, the step should be adjusted.
88
Wait Heating
Dist.Adj. Cleaning
A: HB: HC: HD:H
Heater Warming up
(+) Increase in case of overlap
Decrease in case of white lines between swats
(-)
8265/8290/8365/8390 User Guide