Setting The Date And Time; Setting The Display Brightness - Xerox WorkCentre 6027 User Manual

Installation and Setup

Setting the Date and Time

At the printer control panel, press the Machine Status button.
1.
2. Touch Tools > Admin Settings.
Touch System Settings, then touch General.
3.
4. Touch Date and Time.
Touch Time Zone.
5.
6. Use the Up or Down arrows to navigate, select your geographic region and time zone, then touch
OK.
7. Touch Date.
8. For Month, Day, and Year, to enter a value, touch Plus (+) or Minus (-).
Touch OK.
9.
10. Touch Time.
11. To select the format, touch 12 Hour or 24 Hour.
12. To enter the hour, touch Hour, then use the keypad.
13. To enter the minutes, touch Minute, then use the keypad.
14. Touch OK.
15. To return to the General menu, touch the Back arrow.
Setting the Measurement Units
At the printer control panel, press the Machine Status button.
1.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
Touch Measurement.
4.
5. To select an option for units, touch millimeter (mm) or inches (").
Touch OK.
6.

Setting the Display Brightness

1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
Touch System Settings, then touch General.
3.
4. Touch Display Brightness.
Touch - or + on the display or use the keypad to enter a number from 1 through 10.
5.
6. Touch OK.
®
58 Xerox WorkCentre
User Guide
®
6027 Multifunction Printer