Dial Tone Detection (Dt Detection) - Xerox FaxCentre 2218 User Manual
Faxing, digital copying, direct printing and scanning at 17 pages per minute a4 or 18 pages per minute letter as standard
Hide thumbs
Also See for FaxCentre 2218:
- System administration manual (125 pages) ,
- Voluntary product accessibility template (11 pages) ,
- Service manual (10 pages)
Table of Contents
Advertisement
01_UG.book Page 20 Wednesday, March 7, 2007 3:00 PM
Dial Tone Detection (DT Detection)
This tool is used to allow the user to make the device check for a dial tone before sending a
fax. The device will wait for a maximum of 10 seconds until a dial tone is detected. If a dial
tone is detected, auto dial will start. If a dial tone is not detected, an error will be displayed and
auto dial will not start.
Using DT Detection:
1
Press the [Machine Status] button.
2
Using the Navigation Keys select [System Admin Tools] and press [Enter].
If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
3
Select [DT Detection] and press [Enter].
Select [On] using the navigation tools.
Page 8-20
Xerox FaxCentre 2218 User Guide
Advertisement
Table of Contents
