Xerox FaxCentre 2218 User Manual page 120

01_UG.book Page 8 Wednesday, March 7, 2007 3:00 PM
Collated On
Use to produce
collated copy
sets.
Original Type Text
Use to select the
type of
Mixed
document being
scanned.
Photo
Color Original On
Use when
scanning a color
original.
Paper Supply Status
Map
Use to select the
paper source.
Bypass
Page 5-8
Use to produce collated
output e.g. 2 copies of a 3
page job will print one
complete document,
followed by the second
complete document.
Use for documents
containing mostly text.
Use for documents with
mixed text and graphics.
Use for photographs.
Use when scanning color
originals.
The Status Map identifies
which paper tray is
selected, when a paper
tray is empty and when an
error occurs.
Bypass
Paper
Jam
Tray 1
Tray 2
Use to notify the machine
the type of paper loaded
in the Bypass Tray.
Press [Copy].
Press [Collated].
Use the Navigation Keys to select [On] and press
[Enter].
Press [Copy].
Press [Original Type].
Use the Navigation Keys to select the option
required and press [Enter].
Press [Copy].
Press [Color Original].
Use the Navigation Keys to select [On] and press
[Enter].
Press [Copy].
To select a paper tray, press the [Paper Supply]
key until the required tray is lit on the Status Map.
The Status Map identifies which paper tray is
selected, when a paper tray is empty and when an
error occurs. The Status Map has a light for each
paper tray.
Each time the [Paper Supply] key is pressed, a
different tray is selected and a green light displays
to indicate the selected tray. When two tray lights
display together, the Auto Tray Switching feature
is active. This enables the machine to switch to a
different tray if the current tray runs out of paper.
If a paper tray is empty, the light will flash and if
enabled, an error tone will sound.
If the Bypass Tray is selected the Paper Type
option displays. Use the Navigation Keys to select
the Paper Type being loaded and press [Enter].
If using the Bypass, remember to load the
required stock.
Xerox FaxCentre 2218 User Guide