Xerox FaxCentre 2218 User Manual page 89

01_UG.book Page 15 Wednesday, March 7, 2007 3:00 PM
Polling TX Poll
Polling is used
to retrieve
documents from
remote fax
machines.
Remote fax
machines can
also poll your
machine.
Delay RX
Poll
Batch TX On
Use to send
faxes that are
Off
going to the
same location, in
one batch.
Xerox FaxCentre 2218 User Guide
Use to store a document
on the machine ready to
be polled by a remote fax
machine.
Use to retrieve a
document from a remote
fax machine at a specified
time.
Activates the Batch TX
feature.
Deactivates the Batch TX
feature.
Press [Menu/Exit].
Using the Navigation Keys select [Fax Features]
and press [Enter].
Select [Polling] and press [Enter].
Select [TX Poll] and press [Enter].
Enter a 4 digit Poll Code and press [Enter].
To store the originals in the Bulletin Board select
[On]. If the Bulletin Board is not required, select
[Off].
Press [Start]. The originals are scanned into
memory ready to be polled.
Press [Menu/Exit].
Using the Navigation Keys select [Fax Features]
and press [Enter].
Select [Polling] and press [Enter].
Select [Delay RX Poll] and press [Enter].
Enter the fax number using the Numeric Keypad a
Phonebook entry or One Touch Key, and press
[Enter].
The display shows the current time, enter a start
time for the remote fax machine to be polled.
Press [Enter] when the correct time displays.
If you set a time earlier than the current time, the
job will be sent at that time the following day.
Enter a 4 digit Poll Code and press [Enter].
The machine will poll the remote machine at the
specified time.
Press [Menu/Exit].
Using the Navigation Keys select [Fax Features]
and press [Enter].
Use the Navigation Keys to select [Batch TX] and
press [Enter].
Select [On] and press [Enter]. Enter a Batch
Interval between 0 - 99 and press [Enter].
Page 4-15