Xerox FaxCentre 2218 User Manual page 82

01_UG.book Page 8 Wednesday, March 7, 2007 3:00 PM
Manual Dialing
Use to dial the fax number with the
telephone line open.
Redial
Numbers which have already been
entered recently can be quickly
accessed using the Redial function.
Charge Code
Use to add a charge code to the end
of any manual dial, phonebook entry,
one touch key.
Page 4-8
Load the originals and select [Fax].
Press [Manual Dial].
The dial tone is audible and the LCD displays 'Phone'.
Dial the fax number and a [Charge Code] if needed. When the
fax tone is heard, press [Start] to begin faxing.
Load the originals and select [Fax].
Press [Pause/Redial].
The last number is automatically dialled and the originals are
scanned and faxed.
Load the originals and select [Fax].
Press [Pause/Redial] for approximately 2 seconds.
The Redial Memory in the machine retains the last 10 numbers
dialled.
Using the Navigation Keys, select the number required and
press [Enter].
Press [Start] to dial the number. The fax is automatically
scanned and sent.
Example (Manual Dial).
Press [Manual Dial].
Dial the fax number.
Press [Charge Code].
Enter the charge code using the numeric Keypad and press
[Enter].
The charge code will appear as $$$$ on the display or in
reports.
Xerox FaxCentre 2218 User Guide