01_UG.book Page 12 Wednesday, March 7, 2007 3:00 PM
Passcode Protection
System Administration functions can be restricted to individual users by requiring that a
passcode be entered before access to the functions can be granted.
Enable Passcode Protection
Press the [Machine Status] key.
1
Using the Navigation Keys select [System Admin Tools] and press [Enter].
2
If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
Select [Passcode Protect] using the Navigation Keys and press [Enter].
3
will be asked to enter the passcode. Simply press [Enter] when requested to enter the
passcode.
4
Using the Navigation Keys select the Function to protect from the table below and press
[Enter].
5
Using the Navigation Keys select the Permissions from the table below for the function you
chose in the previous step. Press [Enter].
Page 8-12
When the machine is first installed, the passcode is blank. When you choose Yes, you
FUNCTION
Machine Setup
PERMISSIONS
Protect All
Allow All
Allow Tray Sizes
Xerox FaxCentre 2218 User Guide