Xerox FaxCentre 2218 User Manual page 110

01_UG.book Page 36 Wednesday, March 7, 2007 3:00 PM
MSG Confirm
Auto Reduction
Prefix Dial
Auto Report
ECM Mode
Redials
Ring to Answer
Redial Term
Ringer
Junk Fax Setup
Page 4-36
On Sets the machine to print a transmission report for
every fax transmission.
Off De-activates printing a transmission report.
On-Err Sets the machine to print a transmission report only if
an error has occurred.
On Use to activate the machine performing an automatic
reduction for over-sized fax jobs.
Off Use to de-activate the automatic reduction. Over-
sized jobs are printed on two pages.
Up to 5 digits The number entered will be added to the beginning of
each fax sent.
On Use to enable a report listing details about the
previous 50 communication operations.
Off
On Use to switch on ECM for all transmissions.
Transmission time may be increased when ECM is
enabled.
Off Use to switch off ECM.
[0 - 13] Use to set the number of redial attempts.
[1 - 7] Use to set the number of rings before answering. This
feature is disabled when Receive Mode is set to Ans/
Fax.
[1 - 15] Use to set the number of minutes between redial
attempts.
Off Use to set the ringer volume.
Low
Med
High
On Use to restrict receipt of junk mail by not allowing
faxes to be received from remote machines
Off
registered on your machine.
Xerox FaxCentre 2218 User Guide