Passcode Protection - Xerox CopyCentre C20 User Manual

Passcode Protection

Enable Passcode Protection
1
2
3
4
Page 9-22
Downloaded From ManualsPrinter.com Manuals
System Administration functions can be restricted to individual users by requiring that a
passcode be entered before access to the functions can be granted.
Press the [Machine Status] key.
Using the Navigation Keys select
[System Admin Tools] and press
[Enter].
If the System Admin Tools have
already been passcode
protected, type in the password
and press [Enter].
Select [Passcode Protect] using
the Navigation Keys and press
[Enter].
To enable Passcode Protection,
select [Yes] and press [Enter].
Otherwise select [No] and press
[Enter] to disable Passcode
Protection.
When the machine is first installed, the passcode is blank. When you choose Yes, you will be
asked to enter the passcode. Simply press [Enter] when requested to enter the passcode.
If you enabled Passcode Protection, refer to "Change the Passcode" starting on page 9-23
to enter the new passcode.
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
System Admin Tools
[Passcode Protect]
Passcode Protect
[Yes]