15.4 Calibration Menu Description
CALIBRATION
SYSTEM NAME
DRIVE CONFIG
1141471-L-00
LCD DISPLAY
SYSTEM NAME
INVACARE_
DRIVE CONFIG
>>4P CWD M91 & SP
2P RWD
2P CWD
4P RWD
4P RWD HD
4P CWD TDX
4P CWD HD
GB RWD
GB RWD
Create the Name for the System's Programming Settings
•
Name will be displayed on the Top Right corner of the MK6i Display.
•
Use the Programmer Left & Right Arrow keys to position the Insertion
Point ("_").
•
Use the Programmer Up and Down Arrow keys to change the letter /
number
•
Blank Spaces Not allowed. Name will end at that point.
Switches motor outputs to match appropriate drive configuration. Select the
configuration to match the wheelchair.
•
The wheelchair will not perform as designed without the correct drive
confiuration selected and saved.
•
This setting MUST be changed and saved each time a CMPJ+, PSR, PSF
or Display is added or replaced.
GB RWD and GB CWD are available only on the TDX - SR. G-Trac
controller supports 4P CWD M91 & SP, 4P RWD, 2P-CWD, 2P-RWD and
TDX-SI
DESCRIPTION
Calibration Menu
89