Invacare MK6i Field Reference Manual page 48

LCD DISPLAY
COLOR THEME
MOM/LATCH
> MOM
LTCH
LATCHED TYPE
>CRUISE CTL
1 SPD
3 SPD
3 SPD U/D
5 SPD
5 SPD U/D
1141471-L-00
PERFORMANCE ADJUSTMENT DESCRIPTION
Sets the background color.
•
Available with Color MPJ+ Joystick only.
•
Color Choices: BLUE, SILVER, WHITE, SALMON, PINK, BUCI.
Determines the mode for FORWARD driving commands.
•
Momentary commands are only active while the command is being given.
•
Latched commands remain active after release of the driver control - until 2 reverse
commands or emergency stop switch is activated.
•
Left & Right commands are ALWAYS momentary. (See "MOM/REVERSE").
•
Available on proportional & digital controls on 4 drive systems.
•
Latched driving requires mode switch / emergency stop switch.
Allows different speeds in Latched driving. Present if Latched mode is selected.
•
1 SPEED = 1 Forward Speed.
•
3 SPEEDS = 3 stepped Speeds (1/3 percentages of forward speed).
•
5 SPEEDS = 5 stepped Speeds (1/5 set percentages of forward speed).
•
CRUISE CTL = Default = Cruise Control (set speed determined by driver).
•
Stepped latch will increase one step in speed with each successive forward
command. A reverse command stops the wheelchair. Used to provide speed
selections in latched modes without changing drives.
•
In 3 SPD U/D and 5 SPD U/D, each successive FORWARD command ramps up to
the next step, each successive REVERSE command steps down one step. In U/D
mode, a SUSTAINED REVERSE command STOPS the chair, as does activating the
"Emergency Stop Switch".
•
In cruise control, speed will continuously ramp up as the forward command is
sustained, and maintain the speed reached when releasing the forward command.
Speed decreases in the same rate with a reverse command. Two reverse commands
within one second (or an emergency stop switch) stops the wheelchair.
MK6i Performance Adjustments
49