Invacare MK6i Field Reference Manual page 105

Invacare® MK6i™ Electronics
CALIBRATION
PRS TIME
ERASE ALL
IR SETTINGS >>>
106
LCD DISPLAY
PRS TIME
30 M
Less More
| | | | | | | |
ERASE ALL
Refer to Mk6i IR Control/Mouse Emulation User Manual and Programming Manual, part number 1160891.
DESCRIPTION
Pressure Relief Signal
•
Can be set from 0 to 60 minutes.
•
Requires a Mode Switch.
•
The PRS TIME menu sets a time for an audible warning (on Display only)
that it is time to change positions. The Display will show PRESS RESET
and the wheelchair will not operate until Reset is pressed.
ERASE ALL allows the CMPJ+/Display settings to be set to the factory default
standard programs. There is a confirmation screen that appears and a
reminder to SET THE DRIVE CONFIGURATION (in the Calibration
Menu) after the Erase All completes. If drive configuration is not set, the
display will indicate "Please Set Drive Configuration". To correct this
condition, choose and save the appropriate Drive Configuration in the
Calibrations menu.
1141471-L-00