Driver Control - Invacare MK6i Field Reference Manual

14.3.4 Driver Control

Sets how the driver control will operated the actuators.
DRIVER CONTROL
OFF
> 4-SWITCH
LATCH. 4SW
4 SW-2 LVL
4SWL-2 LVL
MOM.1SW
LATCH.1SW
CAPS
1141471-L-00
•
OFF Disables driver control operation of the powered seating for that drive only.
•
4 SW 4 Directions of driver command operate 4 Actuator Selection choices.
•
LATCH 4 SW Same as 4 SW, but in latched mode. Repeated command stops actuator.
•
4 SW - 2 Levels Recommended for Head Controls in RIM mode. Turns off forward (occipital pad)
command FOR USE AS HEAD REST.
– 1st Mode Switch = level 1, Repeated mode switch = then level 2
¨ Level 1 - Left driver command = "Forward" actuator selection. Right driver command = "Reverse"
actuator selection.
¨ Level 2 - Left drive command = "Left" actuator selection. Right driver command = "Right" actuator
selection.
•
4SWLatch — 2 Levels- Latched Mode. Repeated command stops actuator.
•
MOM.1SW Intended primarily for Head Control drivers operating with RIM.
– Mode switch cycles through each actuator selection choice. Right command operates choice.
•
LATCH.1SW Right command operates the actuators in a latched mode. The first command activates,
repeated command releases.
•
CAPS: "Cycling Actuators with Powered Seating" (Color LCD Screens Only):
– Driver Control Cycles Actuator Options using Left and Right commands:
– Forward command operates actuator Up (upright)
– Reverse commands will operate actuator down (back)
Powered Seating
81