Invacare MK6i Field Reference Manual page 15

Invacare® MK6i™ Electronics
Refer to 7.2 Proportional Attendant Control (PACM6), page
30 for more information about the Proportional Attendant
Control (PACM6).
1. Loosen the two screws A securing the two sections of the
mounting bracket B.
Position the indentation C in the mounting bracket sections
2.
around the tubing.
The PACM6 is typically mounted to tubing on the back
of the seat. Examples include the push handle of the
back cane D or on the spreader bar. It can be mounted
in other locations as desired.
3. Tighten the two screws to secure the mounting bracket to the
tubing.
4. Connect the PACM6 connector E to the network connector
stack (not shown) on the back of the seat. Refer to 3.3.2
Disconnecting the Connectors, page 14.
5. Secure the wiring. Refer to the Power Wheelchair Wiring
Guide, part number 1167603 for information regarding properly
securing the wiring.
16 1141471-L-00