Invacare MK6i Field Reference Manual page 47

Invacare® MK6i™ Electronics
LCD DISPLAY
AXES SEL
FORWARD
REVERSE
LEFT
RIGHT
INPUT TYPE
MPJ
COMP
MEC
PEACHTREE
ANALOG
1500
CONTROL
SNP
DIGITAL
ASL DIG
48
Assigns / Re-Assigns joystick commands to a desired direction.
FORWARD •
Useful when changing "Joystick Operation" in relation to "Joystick Position".
•
Each of the four input axes can be redirected to any output axis, or turned off.
REVERSE
•
Settings DO NOT refer back to default unless manually re-set.
LEFT
•
"Select" Key on Programmer cycles through output choices.
RIGHT
Used to Add / Change Assigned driver control in one or more drives.
MK6i MPJ+, •
Choose desired driver control for each drive according to this list.
PSR+, PSF+ •
Only available when more than one Driver control is connected.
•
Only driver controls connected will be displayed.
COMPACT
•
Only systems with 4 drive modes may add additional driver controls.
JOYSTICK
•
Two driver controls of the same Input Type cannot be used on one chair.
MICRO •
To increase the combinations of driver controls allowed, the following changes
EXTREMITY
were made from MK5 to MK6i:
/ MICRO MINI
– MK5 SWITCH JOY has been divided into MK6i Digital - ASL Digital
– MK5 1812 has been divided into MK6i Analog - MEC - Peachtree
PROPOR-
•
ASL Mushroom and Magitek Controls use ANALOG.
TIONAL
INVACARE
RIM
SIP-N-PUFF
NON-PRO-
PORTIONAL
ASL SYSTEMS
ONLY
PERFORMANCE ADJUSTMENT DESCRIPTION
1141471-L-00