Invacare MK6i Field Reference Manual page 92

CALIBRATION
MONO PORT 1
MONO PORT 2
DISPLAY ORIENT
1141471-L-00
LCD DISPLAY
MONO PORT 1
OFF
>>DRIVE SELECT
MODE SWITCH
<ACTUATOR> UP/DOWN
<ACTUATOR> UP
<ACTUATOR> DOWN
MONO PORT 2
OFF
>>DRIVE SELECT
MODE SWITCH
<ACTUATOR> UP/DOWN
<ACTUATOR> UP
<ACTUATOR> DOWN
DISPLAY ORIENT
NORMAL
INVERTED
DESCRIPTION
Assigns the Function of the Left Mono Port on the
MK6i Display & Multiple Drive Joysticks.
•
Drive Select allows the mono switch to change
Drives 1 through 4.
•
Mode/Reset allows the Switch to function as a
reset switch.
•
<Actuator> Up/Down allows the switch to
operate the actuator (up/down mode) when one
actuator is connected to the system.
•
Mono Port 1 is the default if not using a "Y"
cable (splitter).
Allows a second switch function in the Right Mono
Port of the MK6i Display & Multiple Drive Joysticks.
•
If a second function is selected, a "Y" Splitter
cable –Stereo to two mono – is required to
access the second switch port or else a stereo
switch (2 PB, 2 WT) may be used.
Only available when CMPJ+, PSF or PSR is on the
wheelchair.
•
Choose Normal for CMPJ+ or PSF.
•
Choose Inverted for PSR.
Calibration Menu
93