Connectors; Data Contacts/Internal Bus; Power Jumper Contacts/Field Supply; Figure 2: Data Contacts - WAGO 750-469 Manual

WAGO-I/O-SYSTEM 750
750-469 2AI Thermocouple
3.2

Connectors

3.2.1

Data Contacts/Internal Bus

Communication between the fieldbus coupler/controller and the I/O modules as
well as the system supply of the I/O modules is carried out via the internal bus. It
is comprised of 6 data contacts, which are available as self-cleaning gold spring
contacts.

Figure 2: Data Contacts

Do not place the I/O modules on the gold spring contacts!
Do not place the I/O modules on the gold spring contacts in order to avoid soiling
or scratching!
Ensure that the environment is well grounded!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge. When handling the devices, ensure that the environment
(persons, workplace and packing) is well grounded. Avoid touching conductive
components, e.g. data contacts.
3.2.2

Power Jumper Contacts/Field Supply

The I/O module 750-469 has no power jumper contacts.
Manual
Version 1.1.0
Device Description 17