Diagnostics; Test Inputs And Outputs; Figure 30: Test Inputs And Outputs - WAGO -TO-PASS 761 Manual

WAGO-TO-PASS® 761
761-112 Telecontrol Module Compact, Web
8

Diagnostics

8.1

Test Inputs and Outputs

To test the inputs and outputs select the menu option Controller > Test I/O.
The following window is displayed:

Figure 30: Test inputs and outputs

The process values of the inputs are displayed in the upper area and the process
values of the outputs are displayed in the lower area.
By pressing the buttons [Output 1] ... [Output 4] in the upper area switch digital
inputs on and off.
Click [OK] to end the test and close the window.
Alternatively, the inputs and outputs can also be tested with the help of the menu
option Visualization > Process values.
Manual
Version 2.0.0
Diagnostics 77