Mounting; Mounting The To-Pass ® Telecontrol Module To The Din Rail; Figure 10: Mounting The To-Pass ® Telecontrol Module To The Din Rail - WAGO -TO-PASS 761 Manual

WAGO-TO-PASS® 761
761-112 Telecontrol Module Compact, Web
4

Mounting

IP20 degree of protection
The protection class of the TO-PASS
WAGO Kontakttechnik GmbH & Co. KG recommends mounting in a housing or
in a switching cabinet.
Ambient temperature -20 °C to +70 °C
The TO-PASS
°C to +70 °C.
In the event of higher or lower temperatures, proper cooling or heating
arrangements must be provided.
Please contact WAGO Kontakttechnik GmbH & Co. K.G. for assistance.
The TO-PASS
4.1 Mounting the TO-PASS
DIN rail
Figure 10: Mounting the TO-PASS
1. Place the TO-PASS
2. Press the undersurface against the lower DIN rail edge until the TO-PASS
telecontrol module locks into place.
Manual
Version 2.0.0
®
telecontrol module is designed for an ambient temperature of -20
®
telecontrol module is designed to mount on a DIN 35 carrier rail.
®
telecontrol module to the DIN rail
®
telecontrol module on the DIN rail from above.
®
telecontrol module is IP 20. For this reason,
®
telecontrol module to the
Mounting 31
®