40
Commissioning
6.2.1
Parameterizing
6.3
General Settings
Select the menu item File
connection, interface or language for the TO-PASS
Figure 15: General settings
Table 19: General settings
Connection
RS-232 / GSM /
Analog / ISDN
Modem init.
Area code
Settings for making general settings, such as type of
>
Select the type of connection for communicating with the
®
TO-PASS
telecontrol module:
RS-232
GSM
Dial-up using GSM modem on the PC
Analog
Dial-up using analog modem on the PC
ISDN
Dial-up using ISDN modem on the PC
If the connection is to be established via a modem and this
modem requires initialization, enter the initialization string in
this field.
If this connection is to be established via a modem at an
analog or ISDN PBX and a trunk code is required for this,
enter the trunk code in this field.
WAGO-TO-PASS® 761
761-112 Telecontrol Module Compact, Web
®
operating interface.
Direct connection via RS-232 cable
Manual
Version 2.0.0