Platform Maintenance
Referenced Procedures
This section describes the procedures referenced in the troubleshooting flowcharts. The procedures
are listed in alphabetical order.For referenced FRU procedures, see
Checking Temperature in Application Server via Remote Management Module
Figure 5: Remote Management Module - Monitor Sensors
sensor status. Threshold based sensors within a normal range of operation are displayed in green, and
sensors in a critical state are shown in red.
Figure 5: Remote Management Module - Monitor Sensors
Procedure
Disabling the Periodic Drive Check Time
1. From the Main Menu, choose view and edit Configuration parameters > Drive-side SCSI Parameters
> Periodic Drive Check Time.
A list of Periodic Drive Check Time intervals is displayed.
2. Select Disable
3. A confirmation message is displayed
910-5680-001 Revision F, February 2014
Hardware Diagnostics and Troubleshooting
Field Replaceable Units
gives a visual and detailed report on individual
(FRUs).
33