Platform Maintenance
Table 9: External USB Connector Pin-Out
Pin #
1
2
3
4
Ethernet Connectors
The system provides four RJ45 Ethernet NIC connectors. These NIC connectors are located at the back
®
edge of the Intel
connectors appear as stacked pairs as illustrated in
pin-out of each connector is identical and is defined in
Figure 31: Stacked Ethernet Connector Pair
Table 10: Ethernet Connector Pin-Out
Pin #
1
2
3
4
5
6
7
8
910-5680-001 Revision F, February 2014
Server Board S5000PHB and are accessible on the rear I/O panel. The Ethernet
Signal Name
BI_DA+
BI_DA-
BI_DB+
BI_DC+
BI_DC-
BI_DB-
BI_DD+
BI-DD-
External Hardware Connections
Signal
Fused Vcc (+5V w/ over-current monitor of ports
0, 1, 2, and 3)
DATAL0 (differential data line paired with
DATAH0)
DATAH0 (differential data line paired with
DATAL0)
GND
Figure 31: Stacked Ethernet Connector Pair
Table 10: Ethernet Connector
Description
Bi-directional pair A, +
Bi-directional pair A, -
Bi-directional pair B, +
Bi-directional pair C, +
Bi-directional pair C, -
Bi-directional pair B, -
Bi-directional pair D, +
Bi-directional pair D, -
. The
Pin-Out.
59