Figure 21: Removing The Front Bezel; Figure 22: Removing A Drive Tray From The Chassis - Oracle Tekelec 1200 Maintenance Manual

Platform Maintenance

Figure 21: Removing the Front Bezel

Procedure Removing a Hard Drive
1. Select the drive bay where the hard drive is to be installed.
Note: The drive bays are numbered from right (drive 0, sda) to left (drive 2, sdc).
2. Remove the drive tray by pressing the green button to open the lever.
3. Pull the drive tray assembly out of the chassis.

Figure 22: Removing a Drive Tray from the Chassis

4. Remove the hard drive from the drive tray by unfastening the four screws (Inset A in
Removing a Hard Drive from the Drive
910-5680-001 Revision F, February 2014
(Figure 22: Removing a Drive Tray from the
Tray) that attach it to the drive tray. .
Field Replaceable Units (FRUs)
Figure 23:
Chassis).
50