Frus That Do Not Require Oracle Solaris Cluster Maintenance Procedures - Oracle Solaris Cluster 3.3 System Manual

Maintaining Storage Arrays
TABLE 1–3
Task
Upgrade controller module firmware and NVSRAM file
Add a disk drive
Replace a disk drive
Remove a disk drive
Upgrade disk drive firmware
Replace a host adapter
FRUs That Do Not Require Oracle Solaris Cluster
Maintenance Procedures
Each storage device has a different set of FRUs that do not require cluster-specific procedures.
Choose among the following storage devices:
Netra st A1000 array
■
Sun StorEdge A1000 array
■
Sun StorEdge A3500 system
■
Sun StorEdge A1000 Array and Netra st A1000 Array FRUs
The following is a list of administrative tasks that require no cluster-specific procedures. See the
Sun StorEdge A1000 and D1000 Installation, Operations, and Service Manual and the Netra st
A1000/D1000 Installation and Maintenance Manual for these procedures.
Replacing a power supply
■
Replacing a battery unit
■
Replacing a storage array cooling canister
■
Replacing a power cable on the storage array
■
Replacing a storage array-to-host SCSI cable requires no cluster-specific procedures. See the
Sun StorEdge RAID Manager User's Guide and the Sun StorEdge RAID Manager Release Notes
for these procedures.
32 Oracle Solaris Cluster 3.3 With StorEdge A1000 Array, Netra st A1000 Array, or StorEdge A3500 System Manual
• May 2011, Revision A
Task Map: Maintaining a Storage Array or Storage System (Continued)
Information
"How to Upgrade Controller Module
Firmware" on page 39
"How to Add a Disk Drive" on page 40
"How to Replace a Disk Drive" on page 41
"How to Remove a Disk Drive" on page 43
"How to Upgrade Disk Drive Firmware" on
page 44
"How to Replace a Host Adapter" on
page 44