Overview; Customer-Replaceable And Hot-Swappable Frus; Map Of Fru Replacement Procedures; Table 4: Fru Replacement Procedures For T1200 Platform - Oracle Tekelec 1200 Maintenance Manual

Platform Maintenance

Overview

The field-replaceable units described in this chapter are those that can be replaced quickly and easily
by non-Tekelec technicians. For troubleshooting or replacing other components, contact the
Care Center.

Customer-Replaceable and hot-swappable FRUs

The following T1200 platform components are customer-replaceable:
• From the power distribution panel:
– Breakers
– Alarm card
• From the T1200 application server:
– Hard drives (hot-swappable)
Power supply (hot-swappable only if redundant power supply is installed)

Map of FRU Replacement Procedures

Table 4: FRU Replacement Procedures for T1200 Platform

customer-replaceable T1200 platform FRUs. For any FRUs not listed in this chapter, contact the
Care Center.
Table 4: FRU Replacement Procedures for T1200 Platform
If you need to...
Access the hard drives
Replace an alarm card
Replace a breaker
Replace a hard drive
Replace a power supply
910-5680-001 Revision F, February 2014
Field Replaceable Units (FRUs)
lists the replacement procedures for
...perform this procedure
Procedure Removing the Front Bezel
Procedure Replacing the PDP Alarm Card
Procedure Replacing a Breaker
Procedure Preparing a Hard Drive for Removal
Procedure Removing the Front Bezel
Procedure Removing a Hard Drive
Procedure Installing a Hard Drive
Procedure Replacing the Front Bezel
Procedure Preparing a Hard Drive After
Installation
Procedure Installing the Power Supply Module
Customer
Customer
38