7.1.1.4.6 "Information" Menu Item; Table 42: Monitoring Menu Item - WAGO 750-486/040-000 Manual

WAGO-I/O-SYSTEM 750 XTR
750-486/040-000 4AI 0/4-20mA NE43 Ex i XTR

Table 42: Monitoring Menu Item

Option
Process value overview
Channel
Measured value
Process value (dec)
Process value (hex)

7.1.1.4.6 "Information" Menu Item

This area provides an overview of the specifications for the I/O module used.
You obtain information about the following points:
• Item number
• Description
• Software version
• Hardware version
Description
Display of the bus channel
Display of the calibrated input current in milliamps (mA).
This is a 32-bit value.
If the channel is deactivated, "N/A" (not available) is
displayed.
The measurement value is read cyclically from the I/O
module.
Display of the process value in decimal notation.
If the channel is deactivated, "N/A" (not available) is
displayed.
The process value is read cyclically from the I/O module.
Display of the process value in hexadecimal notation.
If the channel is deactivated, the process value (hex)
"0x7FFF" is displayed.
The process value is read cyclically from the I/O module.
Commissioning 75
Manual
Version 1.0.0