Table 3: Compatibility List 750-486/040-000 - WAGO 750-486/040-000 Manual

WAGO-I/O-SYSTEM 750 XTR
750-486/040-000 4AI 0/4-20mA NE43 Ex i XTR
Do not exceed maximum current via power contacts!
The maximum current available from the "Power Supply 24 VDC Diagn for Ex i
XTR Modules" 750-606/040-000 is 1 A. Greater currents can damage the power
contacts. When configuring the system, ensure that this current is not exceeded.
If exceeded, an additional 750-606/040-000 must be used.
With consideration of the power jumper contacts, the individual modules can be
arranged in any combination when configuring the fieldbus node.
An arrangement in groups within the group of potentials is not necessary.
The 750-486/040-000 module can be used with the fieldbus couplers and
controllers of the WAGO-I/O-SYSTEM 750 of the specified version or higher
listed in the "Compatibility list" table.

Table 3: Compatibility List 750-486/040-000

Bus system
PROFINET
PROFIBUS
ETHERNET
DeviceNet
Fieldbus couplers/
controllers
Fieldbus coupler
Fieldbus coupler
Controller
Fieldbus coupler
Controller
PFC200 controller
Fieldbus coupler
ECO fieldbus coupler
Controller
Device Description
Revision status
Item no.
– firmware
750-375
750-377
750-333
750-333/040-000
750-833
750-342
750-352
750-352/040-000
750-841
750-842
750-843
750-852
750-871
750-872
750-873
750-880
750-880/040-00x
750-881
750-882
750-885
750-82xx
750-82xx/040-00x
750-306
750-346
750-806
15
03
03
18
18
17
18
04
04
20
19
03
01
08
04
04
04
04
04
04
04
01
01
4L
11
11
Manual
Version 1.0.0