Connecting To The Wireless Network Using Wps - Yealink MP56 User Manual

2. Tap More > Scan.
3. Select the desired wireless network.
4. If the network is secure, enter its password.
5. Tap Connect to save the change.

Connecting to the Wireless Network Using WPS

Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless networks,
which can automatically configure a wireless network with a network name (SSID) and strong WPA data
encryption and authentication.
About this task
Two methods supported by Yealink devices in the Wi-Fi protected setup:
Push Button Configuration (PBC): The user simply presses the WPS key on both the device and
•
router to connect.
Personal Identification Number (PIN): The user has to enter a PIN generated randomly by the device
•
on the router to connect.
• Connecting to the Wireless Network Using PBC
• Connecting to the Wireless Network Using PIN
Connecting to the Wireless Network Using PBC
Before you begin
Make sure you have activated the Wi-Fi mode.
Procedure
1. Go to Menu > Setting > Basic > Wi-Fi
2. Tap WPS More > WPS.
The phone prompts that you need to press the Wi-Fi Protected Setup button on your router.
3. Long press the WPS button on your router.
Once WPS setup has completed successfully, the phone displays the connection is successful.
Connecting to the Wireless Network Using PIN
Before you begin
Make sure you have activated the Wi-Fi mode.
Procedure
1. Go to Menu > Setting > Basic > Wi-Fi
2. Tap
The phone prompts The phone prompts that you need to enter the PIN xxx on your WLAN router.
3. Log into your router's web interface, and configure it to search the clients.
Once WPS-PIN setup completes successfully, the web interface of gateway displays the connection is
successful.
| Wireless Network | 79