Starting the Yealink BToE Connector Software
You can start the Yealink BToE connector manually if it does not start automatically.
Procedure
Double-click the Yealink BToE Connector desktop icon on your PC or click Start > All Programs > Yealink
BToE Connector.
Setting Yealink BToE Connector Software
You can customize settings for the Yealink BToE Connector software.
Procedure
1.
Right-click
in the system tray and select Settings.
2. Do the following:
Check the Run automatically when starting Windows checkbox, this software starts automatically
•
once the PC starts.
If you uncheck the Wired checkbox, you need to enter the IP address of your phone manually.
•
If you check the Wired checkbox, and you connect a PC to the PC port on your phone using an
•
Ethernet cable, the IP address of your phone is entered automatically.
Pairing Your Phone with Your PC
Before you can begin using BToE, you must pair your phone with your PC.
•
Enabling BToE and Selecting a Paring Mode
•
Pairing Your Phone with Your PC over Ethernet
•
Pairing Your Phone with Your PC using Phone IP Address
•
Viewing Pairing Status
Enabling BToE and Selecting a Paring Mode
By default, your phone is set to pair with your computer automatically when Better Together over Ethernet
is enabled and you connect your phone to your computer over Ethernet. You can also choose to manually
pair your phone with your computer using the BToE Connector application and a pairing code generated by
your phone. Manual pairing ensures user information security and prevents anyone from pairing with the
phone.
Procedure
1. Go to Menu > Setting > Features > BToE.
2. Turn on BToE.
3. In the BToE Pairing Mode field, select Auto or Manual.
4. Save the change.
| Using Yealink BToE Connector Software | 86