5. Enter the group name in the Label field.
6. Save the change.
7. Repeat steps 2 to 6, you can add more paging groups.
If the paging group is configured successfully, a line key is assigned as the Paging List key
automatically. You can press it to enter the paging list.
Deleting a Paging Group
You can delete the desired paging group.
Procedure
1.
Tap
or go to Menu > Setting > Features > Paging List.
2. Select a desired paging group.
3.
Tap
> Delete.
The phone screen prompts you whether to delete or not.
4. Select OK.
If you want to delete all paging groups, you can tap Delete All press Delete All (Del All).
Sending Multicast Paging
Procedure
1. Do one of the following to enter the paging list:
•
When the phone is idle, tap
During a call, go to More > Paging.
•
2. Tap the desired item.
Both your phone and receiver's phone play a warning tone. The multicast RTP session will be
automatically answered on the receiver's phone in the speakerphone (hands-free) mode.
Receiving Multicast Paging
Your system administrator has set a listening paging group for you, and then you can receive a paging call
when the phone is idle. When there is a voice call or a paging call in progress, or when DND is activated
on your phone, the phone handles the new paging call differently which depends on multicast listening
settings configured by your system administrator.
Managing a Paging Call
Procedure
During a paging call, you can do the following:
Select Hold to place the current paging call on hold. The paging call is placed on hold and receiver's
•
phone releases the session.
•
Select Resume to resume the held paging call. The multicast RTP session is re-established.
•
Select End Call to end the paging call.
or go to Menu > Setting > Features > Paging List.
或
| Advanced Phone Features | 70