Yealink T58A User Manual

To place a call:

· Lift the handset and dial the number or press the speaker phone button to make a speaker
phone call, press Send.
· Internal Call: Dial the extension number of the location you are calling.
No need to dial 9 or choose a line when dialing out

Hold:

· To place caller on hold, press the Hold
· If there is only one caller that is on hold, press the Hold key again or press the "Resume" soft
key
· If there is more than one call on hold, tap the call you want to resume, and press the hold
button or tap the Resume soft key.
· NOTE: calls placed on hold are only able to be picked back up by you. See "Park Orbit"

To Transfer a Call:

BLIND TRANSFER
· Press the transfer
Transfer soft key. The call is then placed on hold.
· Dial the persons extension or external number.
· Press to complete transfer.
ATTENDED TRANSFER
· Press the transfer
hold.
· Enter the number you wish to transfer to, then press the
· Once call is announced, press

Conference Calls:

· Tap the Conference soft key during an active call. The call is then placed on hold.
· Enter the number of the third party, and then press
· Tap the Conference soft key again when the second party answers. All parties are now
joined in the conference.
· Tap the Endcall soft key to disconnect all parties.
Yealink T58A Telephone User Guide
button or tap the
button or Transfer soft key during a call. The call is then placed on
or tap the Transfer soft key to complete transfer.
key
or tap Conference.
button.
1