Install Fittings On The Autoboom Valve - Raven AutoBoom Installation Manual

Chapter 3
PowerGlide Wiring Kit (P/N 117-0137-022)
TABLE 3.
Picture

Install Fittings on the AutoBoom Valve

Before mounting the AutoBoom valve on the machine, install the proper fittings on the valve. This prepares the
valve for installation and simplifies the hose connection process later in the procedure. Refer to the following
table to install the fittings in the appropriate ports on the AutoBoom valve.
Fitting - 9/16" JIC (M) to 9/16" SAE O-Ring (M) Straight Adapter
Fitting - 9/16" JIC M/F 90° Swivel Elbow
Fitting - 9/16" JIC (M) to 3/4" SAE O-Ring (M) Straight Adapter
Fitting - 11/16" Hex 9/16" Plug
Fitting - 3/4" Hex Plug
10
Item Description
Cable - AutoBoom Controller
Cable - AutoBoom Valve Harness
Fitting
Apache (2004 & Older) AutoBoom Installation Manual
Part Number Qty.
115-0230-002 1
115-0230-003 1
Part Number
333-0012-045 LC, RC
333-0012-042 LC, RC
333-0012-046
333-0012-194 LV, RV
333-0012-211
Port
P, T
EF