Install The Fittings On The Autoboom Valve; Mount The Autoboom Valve - Raven AutoBoom Installation Manual

Chapter 3

Install the Fittings on the AutoBoom Valve

Before mounting the AutoBoom valve on the machine, install the fittings in the appropriate ports of the
AutoBoom valve. This prepares the valve for installation and simplifies the hose connection process later in the
procedure. Refer to the following table to install the fittings.
Fitting - 11/16" ORFS (M) to 3/4" SAE O-Ring (M) 90° Elbow
Fitting - 11/16" ORFS (M) to 9/16" SAE O-Ring (M) Straight Adapter
Fitting - 13/16" ORFS (M) to 3/4" SAE O-Ring (M) Straight Adapter
Fitting - 11/16" Hex 9/16" SAE O-Ring Plug

Mount the AutoBoom Valve

AutoBoom Valve Mounted on the Valve Mounting Plate
FIGURE 7.
Secure the AutoBoom valve (P/N 063-0131-124) to the mounting plate (P/N 107-0171-802) using four
1.
5/16" hex bolts (P/N 311-0052-104) and four 5/16" lock washers (P/N 313-1000-019).
AutoBoom Valve Mounted on the Machine
FIGURE 8.
14 Case IH Patriot, Model Year 2010 & Newer AutoBoom™ Installation Manual
Fitting Part Number Port
LF CYL RTN,
333-0012-165
RT CYL RTN
333-0012-084 LC, RC
333-0012-168 P, T
333-0012-194 LV, RV