Install The Powerglide Hydraulic System; Install Fittings On The Autoboom Valve - Raven Top Air AutoBoom Installation Manual

C 3
HAPTER

INSTALL THE POWERGLIDE HYDRAULIC SYSTEM

INSTALL FITTINGS ON THE AUTOBOOM VALVE

Before mounting the AutoBoom valve on the machine, install the proper fittings on the valve. This prepares the
valve for installation and simplifies the hose connection process later in the procedure. Refer to the following table
to install the fittings in the appropriate ports of the AutoBoom valve.
Fitting - 9/16" JIC O-Ring (M) to 9/16" SAE O-Ring (M) Straight Adapter
Fitting - 3/4" JIC O-Ring (M) to 3/4" SAE O-Ring (M) Straight Adapter
Fitting - 11/16" Hex 9/16" SAE O-Ring Plug
8
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to prevent
any foreign material from being introduced into
the machine's hydraulic system.
Objects or materials that are able to bypass the
machine's hydraulic filtration system will reduce
performance and possibly damage the
AutoBoom hydraulic valve.
NOTICE
The appearance of the AutoBoom hydraulic valve
may vary slightly from the images contained in
this manual. However, the fittings, hose
connections, and cable connections remain the
same.
Fitting
WARNING
CAUTION
Part Number
333-0012-350
333-0012-351
333-0012-194
Top Air AutoBoom Installation Manual
Port
LC, RC
P, T, EF
LV, RV