Install The Pressure And Tank Hoses - Raven AutoBoom Installation Manual

AutoBoom Valve Mounted on the Sprayer
FIGURE 8.
Secure the mounting plate on the center rack using two 3-1/16" W x 5" L x 3/8" thread U-bolts (P/N 107-
2.
0171-607) and four 3/8"-16 zinc flanged lock nuts (P/N 312-1001-164).

Install the Pressure and Tank Hoses

Manual No. 016-0230-013
WARNING
Hydraulics are under pressure. Care should
always be taken with a system that has been
pressurized. When disconnecting or purging
hydraulic hoses, be aware that the hydraulic
fluid within the machine's system may be
extremely hot and under high pressure.
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to
prevent any foreign material or contaminants
from being introduced into the machine's
hydraulic system.
Objects or materials that are able to bypass the
machine's hydraulic filtration system will reduce
performance and possibly damage the
AutoBoom hydraulic valve.
PowerGlide Plus
27