Table of Contents
Advertisement
Unpack and Inspect the Module
Upon delivery, follow these steps to unpack, and inspect the module.
IMPORTANT
1. Inspect the shipping container for any damage that occurred during transit.
2. Remove the cover of the shipping container.
3. Remove the protective packing materials.
4. Inspect the module for any damage.
5. If damage to the module exists, contact the carrier that delivered the shipment and your
Rockwell Automation sales representative to schedule an inspection.
6. Retain all product packaging for review by the carrier.
7. Remove the fasteners that secure the module to the pallet, if applicable.
8. After unpacking, check the item nameplate catalog number against the purchase order.
Lifting Instructions
A hoist, straps, and J-hooks with a lockable clasp capable of supporting the maximum module
weight are recommended. See
These lifting instructions apply to catalog numbers 2198-RP200, 2198-RP263, and
2198-RP312.
Read the Lifting Precautions
Read these precautions before attempting to lift the regenerative bus supply.
ATTENTION: All equipment and hardware that is used to lift the module must be properly sized
and rated to lift and hold the weight of the module safely. To guard against possible personal
injury or equipment damage:
• Inspect all hardware for proper attachment before a module is lifted.
• Do not let any part of the module or lift equipment to contact electrically charged conductors
or components.
• Do not subject the module to high rates of acceleration or deceleration during a lift or
transportation.
• Do not allow personnel or their limbs directly beneath the module during a lift.
Delivery of equipment from Rockwell Automation to the carrier is considered delivery to the
buyer. The carrier becomes liable for any damage that occurs during transit. It is the
responsibility of the buyer to notify the proper party if damage is found. The buyer can forfeit
any right to recovery for loss or damages by failing to comply with these steps.
Specifications
Rockwell Automation Publication 2198-IN014A-EN-P - August 2018
on
page 18
for weight specifications.
Kinetix 5700 Regenerative Bus Supply
3
Advertisement
Table of Contents
