Table 3.12 16Sli2 Board Ports - Samsung OfficeServ 7400 Technical Manual

Table of Contents
Home Page
OfficeServ 7400 INSTALLATION
TECHNICAL MANUAL PART 3 JUNE 2006
3.3.8 16SLI2/16MWSLI
This board provides 16 ports for connecting analog stations. It can go into any universal
slot of any cabinet. Add as many as needed. This card automatically detects DTMF or
dial pulse signals from the SLT. This card has no DTMF receiver. It will share the system
resources. If there is a high concentration of SLI cards, and MFM or CRM daughter
board must be added to relieve congestion. MFM and CRM's can be added to the LP40.
FRONT VIEW OF 16SLI2/16MWSLI BOARD
The front view of the 16SLI2/16MWSLI board is shown in the picture below.
Figure 3.26 Front View of the 16SLI2
Front panel components of the 16SLI2:

Table 3.12 16SLI2 Board Ports

Ports & LEDs Function Description
P1~P16 Analog Extension Ports
• The 16MWSLI supports Message Waiting Lamp functionality for analog stations that
have this capability.
• Port 1 supports Power Failure Transfer function
(Refer to Section 3.4).
• See Section 7.1.2 for port Pinout/Wiring.
• Do not connect devices with a total REN greater than 5.0 to this card.
3.29