Samsung OfficeServ 7400 Technical Manual page 61

OfficeServ 7400
TECHNICAL MANUAL
• LRT Status LED: This indicates that the LAN port is Receiving and/or Transmitting
Data
• SDN Status LED: This is the System Status LED showing the operating status of
the card. A status of green indicates the SVMi-20E is down and it is safe to power off
the switch. A status of red indicated the SVMi-20E is up and running and it is NOT
safe to power down the switch without possible corruption to the SVM databases.
• PGD Status LED: Green indicates that good Power is being provided to the SVMi-
20E through the Back Plane
INSTALLING THE SVMi-20E
When installing a SVMi-20E card, it is important to remember that it is a computer,
much the same as any desktop PC and it is therefore very important not to exceed
these environmental PLIMits.
Note: Before installing this card it should be correctly configured with the appropriate
drive, number of Voice Processing Modules (VPMs), and all other optional add on
modules (Modem and/or 64MB DRAM).
GENERAL
• POWER REQUIREMENTS: Because the SVMi-20E does NOT draw from the -48DC
supply it has a Zero (0) SEPU rating under all possible configurations
• OfficeServ 7000 Series HARDWARE COMPATIBILITY: No special requirements.
• OfficeServ 7000 Series SOFTWARE COMPATIBILITY: All versions of the
OfficeServ 7000 Series software are compatible with the SVMi-20E.
INSPECTION
Unpack and inspect the unit for any obvious damage. This card should be labeled
SVMi-20E. If it is not, you have the wrong card.
3.46
Table of Contents
Home Page
INSTALLATION
PART 3 JUNE 2006