Samsung OfficeServ 7400 Technical Manual page 105

OfficeServ 7400
TECHNICAL MANUAL
IN WALL-MOUNTING
Figure 7.23 Wall-Mounting DS 5000, ITP-5121D and ITP-5107S Keysets
64 BUTTON MODULES
Using one pair twisted #24 AWG or #26 AWG jumper wire, cross-connect each 64
button module (64 BM) to the DLI port or plug into the KDb-DLI of your choice
7.1.8 of this installation
telephone. It must be assigned to that station in MMC 209. A maximum of four (4) 64
button modules can be programmed on a system. OfficeServ 7400 system can have a
maximum of four (4) 64 button modules per keyset.
CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger telecommu-
nication line cord.
BASE STAND SLOTS
SCREW HOLES
1 2
BASE STAND
HANDSET
RETAINING CLIP
POSITION
section). The 64 BM module can be assigned to any keyset
7.17
Home Page
INSTALLATION
PART 7 JUNE 2006
HANDSET
RETAINING CLIP
IN DESKTOP
POSITION
G
Table of Contents
(see part