Samsung OfficeServ 7400 Technical Manual page 4

Table of Contents
Home Page
OfficeServ 7400 INSTALLATION
TECHNICAL MANUAL TABLE OF CONTENTS JUNE 2006
FIGURE 3.34: Front View of the PLIM Board
FIGURE 3.35: Setting the jumpers on the GPLIM Module
FIGURE 3.36: Front View of the GPLIM Module
FIGURE 3.37: Setting the jumpers on the GSIM Module
FIGURE 3.38: Front View of the GSIM Module
FIGURE 3.39: Mounting Optional Boards on MGI Card
FIGURE 3.40: Front View of the MGI Card
FIGURE 3.41: Front View of the MGI64 Card
FIGURE 3.42: SVMi-20E LED Indications
FIGURE 3.43: SVMi-20E/HD and SVMi-20E/CF
FIGURE 3.44: Power Fail Transfer Connection to 16MWSLI/16SLI2/8SLI
FIGURE 4.1: Connecting an External Battery (1)
FIGURE 4.2: Connecting an External Battery (2)
FIGURE 5.1: Connecting Power (for Single Cabinet)
FIGURE 5.2: Connecting Power (Multiple Cabinet)
FIGURE 5.3: Front View of the OfficeServ 7150
FIGURE 5.4: Rear View of the OfficeServ 7150
FIGURE 5.5: Tools Needed for Installation in a Rack
FIGURE 5.6: Installation in a Rack (1)
FIGURE 5.7: Installation in a Rack (2)
FIGURE 5.8: Installation in a Rack (3)
FIGURE 5.9: Installation in a Rack (4)
FIGURE 5.10: OfficeServ 7150 Grounding
FIGURE 5.11: Connecting an External Battery
FIGURE 5.12: Power Connection
FIGURE 5.13: PoE Cable
FIGURE 5.14: Connecting OS 7150 to OS 7400
FIGURE 6.1: 8TRK Board
FIGURE 6.2: RJ-45 Port of TEPRI/TEPRIa/TEPRI2 Board
FIGURE 7.1: RJ-45 Port of the 8SLI Board